RORO skip hire acrossEnglandScotlandWales
0333 121 1056
Waste Types · Construction

Construction Waste RORO Skips for Building Sites

Containers sized to the phase of the build, with heavy materials, plasterboard and hazardous finds each sent down the correct route.

Construction Waste 0333 121 1056
  • Licensed local partners across England, Scotland and Wales
  • Waste paperwork provided with every job
  • Free, no-obligation quotes
Get a Quick Quote

A building site does not produce one kind of waste. Groundworks send out soil and stone; the frame and envelope produce offcuts, pallets and wrap; fit-out generates plasterboard, insulation, cable drums and an astonishing amount of cardboard. The container that suited the first month is rarely right for the last.

Roll-on roll-off skip hire works well on construction projects because the container can be exchanged as often as the programme demands and the size can change from one phase to the next. We coordinate deliveries and exchanges through licensed local partners, and each load leaves site with a waste transfer note describing what is in it.

The one rule that catches people out is weight. Mixed construction waste containing a high proportion of brick, block or concrete is far denser than it looks, and a large container cannot simply be filled with it.

Matching the container to the phase

During substructure and groundworks, most arisings are heavy. These suit a 20-yard RORO loaded only as far as the weight limit allows, or removal by grab hire straight from a stockpile. Once the structure is up, waste becomes lighter and bulkier, and a 30-yard or 40-yard RORO for mixed waste keeps pace with several trades working at once. Late in the job, when packaging dominates, larger containers on frequent exchange stop the compound overflowing. Tell us your programme and we will suggest when to change size. It is easier to plan this at the start than to discover mid-job that the compound is wrong.

Separating waste on site

Segregation at source is usually worth the space it takes. Clean timber, metal, inert rubble and packaging each have an established recycling route when kept apart, and separated loads are easier to describe accurately on the paperwork. A typical compound on a larger project has a mixed-waste container plus dedicated containers for wood and inert material, and a skip for metal. On constrained urban sites there may be room for only one RORO, in which case mixed waste is sorted after collection and the heavy fraction is kept out. Label each container clearly and brief every subcontractor at induction.

Plasterboard and other gypsum waste

Gypsum-based materials must not be mixed with general or biodegradable waste, so plasterboard offcuts need their own container from the first day of dry-lining. On large fit-outs that may be a dedicated RORO; on smaller ones an enclosed skip protects the board from rain, which matters because wet, contaminated board is harder to recycle. Our plasterboard guide covers container choice and what counts as contamination. Board that has been tiled, foil-backed or bonded to insulation should be mentioned when you enquire, since not every facility takes laminated products. Keep the plasterboard container near the work face so that offcuts do not drift into the mixed waste.

Getting a hook-loader on and off site

A RORO container is rolled off the back of a hook-loader lorry, which needs firm, reasonably level ground, clear space in line with the drop position and unobstructed height overhead. Scaffolding, overhead cables, soft ground after rain and vehicles parked in the approach are the usual causes of failed deliveries. Containers are normally set down inside the hoarding on private land. Space and ground requirements vary by vehicle and are confirmed with your quote; our delivery and access guide lists what to check beforehand. Naming one person on site to meet the vehicle avoids most problems.

Smaller sites and tight plots

Not every site can take a hook-loader. Infill plots, extensions and refurbishments on residential streets are often better served by construction skip hire, where a conventional skip is set down by a skip-loader lorry in a smaller footprint. Where nothing can be left on site at all, a wait-and-load skip or a grab lorry collecting from the kerbside may be arranged, subject to local availability. Conventional skips up to 14 cubic yards cover most small-site needs, and several can be exchanged in rotation where volume is high but space is not. The same rules on heavy waste, plasterboard and hazardous items apply whichever container is used.

Typically accepted as mixed construction waste

  • Timber offcuts, shuttering and pallets
  • Packaging, shrink wrap and cardboard
  • Insulation offcuts (non-hazardous)
  • Plastic pipe, conduit and trunking
  • Metal offcuts, banding and fixings
  • Ceiling tiles and floor coverings
  • Limited brick and block within the weight limit
  • Empty, dry non-hazardous containers

Not for a mixed construction container

  • Asbestos or anything suspected to contain it
  • Plasterboard (separate container)
  • Coal tar road planings
  • Contaminated soil
  • Paint, adhesive and sealant tins with liquid contents
  • Oils, fuels and oily rags
  • Gas cylinders and aerosols
  • Electrical equipment, batteries and lamps
  • Loads consisting mainly of concrete or soil in a large container
These items can’t go in a standard RORO skip, but we can arrange a separate specialist collection.Get a quote →

Not sure? See our waste types guide or ask us when you book.

Typical sites

  • Housing developments
  • Commercial new build
  • Fit-out and refurbishment
  • School and hospital projects
  • Industrial units
  • Infrastructure compounds

Construction Waste – your questions answered

Can’t see your question? Call 0333 121 1056 or send us a message.

Can bricks and concrete go in a 40-yard RORO?

Only as a small part of a light mixed load. A 40-yard container filled with brick or concrete would greatly exceed what the vehicle can legally carry. For inert material, use a smaller RORO part-filled, a conventional skip, or a grab or tipper lorry. See concrete and rubble for the options.

What should we do if asbestos turns up during the works?

Stop work in that area and keep the material out of every waste container. Asbestos must be handled, packaged and transported as hazardous waste under a consignment note. We arrange compliant removal through our asbestos service. Paints, oils, gas cylinders and electrical items are also barred from a mixed-waste RORO skip; see specialist waste collections.

How do exchanges work once the container is full?

You contact us when the container is nearly full; a hook-loader brings an empty container and takes the full one away in the same visit. Timing depends on local availability and is confirmed when you book, so it helps to call before the container is completely full.

Does the container need a permit on a construction site?

Not if it stands on private land within the site boundary, which is the normal arrangement. A container on the public highway needs permission from the local council, and for RORO sizes that is often refused. Our RORO skip permits guide explains the position.

Often booked with Construction Waste

Need more than one service for the same project? Add them to one enquiry and we’ll coordinate them together.

Get a quote

Get a Quick Quote

Tell us the site postcode, the waste, the container size if you know it, and when you need it. Mention exchanges, other sites or specialist waste and we will include them. Photos of the waste and the access help.

Prefer to talk? 0333 121 1056

ROROSkipHire.com is operated by Waste Cloud Ltd. Services are coordinated centrally and carried out by licensed local waste management and haulage partners across England, Scotland and Wales.