RORO skip hire acrossEnglandScotlandWales
0333 121 1056
Help & Advice · Sizing

How to Choose the Correct RORO Size

Six open RORO sizes run from 20 to 50 cubic yards. The right one depends on how heavy the waste is, how you load it and what the site can take.

How to Choose the Correct RORO Size 0333 121 1056
  • Licensed local partners across England, Scotland and Wales
  • Waste paperwork provided with every job
  • Free, no-obligation quotes
Get a Quick Quote

Choosing a RORO size by volume alone is the most common mistake we see. But a roll-on roll-off container travels on a hook-loader lorry with a legal maximum weight, and for dense materials that limit is reached while the container is still mostly empty. Order too big for heavy waste and you pay for air; order too small for bulky waste and you pay for extra journeys.

The open containers we arrange come in 20, 25, 30, 35, 40 and 50 cubic yards, subject to local availability. Those figures are nominal volumes. Dimensions and payloads vary by container and local partner and are confirmed with your quote, so this guide deals in principles: density first, then quantity, then loading and space. The RORO skip sizes hub has a page for each container if you want the detail.

Step one: how dense is the waste

Sort your waste into one of three rough groups before thinking about volume.

  • Heavy: soil, clay, concrete, brick, hardcore, tiles, wet plaster, metal swarf. These belong in the smallest RORO size, the 20-yard, part-filled, or in skips, grab lorries or tippers.
  • Medium: mixed construction and demolition waste, timber, plasterboard, mixed factory waste. The mid-range containers are the usual fit.
  • Light and bulky: cardboard, packaging, pallets, plastics, insulation, shopfitting waste, furniture. These justify the largest sizes.

If a load mixes groups, the heavy fraction governs. Better still, separate the rubble out.

Step two: estimate the quantity

For a one-off clearance, measure the pile or the space the waste occupies and allow for the gaps that appear when irregular items are thrown in. Flat-packing cardboard, breaking down pallets and nesting items makes a marked difference to how much a container holds. For reference, a 20-yard container is nominally about 15.3 cubic metres and a 40-yard about 30.6 cubic metres.

For ongoing waste, think in terms of rate: how much do you produce in a week? That tells you whether one container on regular exchange will keep pace. Loads must sit below the top of the container so they can be sheeted, so do not plan on heaping.

Which sizes suit which jobs

The 20-yard container has low sides, loads easily by hand or machine and is the one used for denser waste. The 25, 30 and 35-yard sizes cover most mixed construction, refurbishment and manufacturing waste.

The 40-yard RORO is the standard choice for high volumes of light mixed commercial waste, and the 50-yard is reserved for bulky, relatively lightweight commercial and industrial material such as packaging, pallets, light timber, plastics and insulation. It is never suitable for heavy waste. Two comparison articles go further: 20 vs 40 yard and 40 vs 50 yard.

Step three: loading method and site space

Bigger containers are taller as well as longer. If waste will be thrown in by hand, high sides slow the job and tempt people to leave items on the ground. Rear doors help, since material can be carried or barrowed in, but only if there is room to open them.

Then check the site. A larger container needs a longer footprint and a longer straight approach for the hook-loader, and not every yard can offer that. Where the ideal size will not fit, a smaller container on more frequent exchange achieves the same result. Our delivery and access guide lists what to look at.

One large container or regular exchanges

There are two ways to handle a large quantity: a big container collected once, or a smaller one swapped several times. A single large container means fewer lorry movements and less disruption. Regular RORO skip exchanges with a smaller size keep the yard clearer, suit denser waste and stop material sitting around for long.

Waste that smells, attracts vermin or poses a fire risk should not be stored for extended periods simply to fill a container. For that kind of material, size for the frequency you need, not the other way round.

Keep restricted waste out of the calculation

When you add up what needs to go, leave out anything a standard mixed-waste RORO cannot accept. Asbestos, electrical equipment, fridges, batteries, tyres, gas cylinders, paints, solvents, oils, chemicals, fluorescent tubes and clinical waste all need their own arrangements, and plasterboard must be kept separate from mixed loads. These are handled through specialist waste collections, such as asbestos.

Once you have the waste type, a rough quantity, the loading method and the space available, send them through the quote form or call 0333 121 1056. We check sizes against your postcode and recommend a container, and will say so if a different service would do the job better.

Useful for

  • First-time RORO customers
  • Contractors pricing a job
  • Warehouse and factory managers
  • Shopfitters
  • Clearance projects

How to Choose the Correct RORO Size – your questions answered

Can’t see your question? Call 0333 121 1056 or send us a message.

Is it better to order a bigger RORO than I think I need?

For light, bulky waste a size up is sensible insurance, since under-ordering means a second journey. For heavy or mixed-heavy waste it is the wrong instinct: the extra space cannot be used without exceeding the legal weight.

Which RORO size is used for heavy waste such as soil and rubble?

The 20-yard. It is the low-sided container in the range and is normally part-filled with dense material so the load stays within the legal weight. The local partner confirms the weight allowance with the quote, and skips, grab lorries or tippers are the alternatives.

How do I know if my waste is too heavy for a 40-yard container?

If a significant part of the load is soil, rubble, concrete, brick, tiles, wet material or dense metal, assume it is. A 40-yard container is intended for light mixed waste. Describe the contents honestly when you enquire; the local partner confirms the weight allowance with the quote.

Can I change container size part-way through a hire?

Usually, yes, subject to local availability. The simplest point to switch is at an exchange, when the full container is collected and a different size is delivered in its place. Let us know before the exchange is scheduled.

Often booked with How to Choose the Correct RORO Size

Need more than one service for the same project? Add them to one enquiry and we’ll coordinate them together.

Get a quote

Get a Quick Quote

Tell us the site postcode, the waste, the container size if you know it, and when you need it. Mention exchanges, other sites or specialist waste and we will include them. Photos of the waste and the access help.

Prefer to talk? 0333 121 1056

ROROSkipHire.com is operated by Waste Cloud Ltd. Services are coordinated centrally and carried out by licensed local waste management and haulage partners across England, Scotland and Wales.