RORO skip hire acrossEnglandScotlandWales
0333 121 1056
Help & Advice · Site Access

RORO Delivery and Access Requirements

Most failed RORO deliveries come down to access rather than availability. This guide covers the route in, the ground, the overhead clearance and the information a haulier needs before a hook-loader sets off.

RORO Delivery and Access Requirements 0333 121 1056
  • Licensed local partners across England, Scotland and Wales
  • Waste paperwork provided with every job
  • Free, no-obligation quotes
Get a Quick Quote

A roll-on roll-off container is not lowered on chains like a builder’s skip. It is slid off the back of a hook-loader lorry, a rigid heavy goods vehicle with a hydraulic arm that pushes the container rearwards until it rests on the ground. That method is quick and safe, but it asks more of a site than people expect: a clear approach, a straight run in line with the drop position, ground that will carry a loaded lorry, and nothing overhead where the arm lifts.

Exact vehicle sizes, container dimensions and the working room required vary by container and local partner, so we do not publish a single figure. They are confirmed with your quote, once we know which of the RORO sizes you need and what the site looks like.

How the hook-loader puts the container down

The driver lines the lorry up with its back end pointing at the spot where the container will sit, then reverses towards it. The arm tilts and pushes the container backwards; its rear rollers touch down first and the lorry eases forward to lay the rest flat. Collection and any exchange repeat the movement in reverse, so the approach must be as clear on collection day as it was on delivery.

Two things follow from this. The lorry and container need to be in a straight line during the lift, so a position tucked round a tight corner rarely works. And the container’s rear doors end up facing away from the lorry, so think about which way you want them to open before the driver arrives.

Checking the route from the public road

Walk or drive the route as if you were in a large rigid lorry. The usual obstacles are:

  • narrow gateways, gateposts and barriers that cannot be fully opened
  • weight-restricted or low bridges on the approach roads
  • tight junctions and residential streets lined with parked cars
  • sharp turns immediately inside the entrance
  • site gates that are locked outside certain hours, or security that needs notice of a delivery

In town and city centres, also check for timed loading restrictions, pedestrianised streets and vehicle emission zones. If the only way in means reversing off a busy road, say so when you enquire.

Ground that will take the weight

A hook-loader carrying a full container is one of the heaviest vehicles likely to visit your premises, and the load is concentrated at the rear as the container comes off. The drop position and the route to it should be firm, reasonably level hardstanding built for heavy goods traffic, such as a concrete service yard or a properly constructed site road.

Be cautious with block paving, thin tarmac, decorative surfaces, grass and recently backfilled trenches. Manhole covers, drainage channels and shallow service ducts can be damaged by wheels or by the container’s rollers. On construction sites, compacted MOT Type 1 or crushed concrete makes a workable temporary pad. Sloping ground is a problem in itself, because a container can move as it is released and loads unevenly afterwards.

Overhead clearance and what sits around the container

During the lift the front of the container rises well above the cab. Overhead power lines are the serious hazard, followed by telephone cables, tree branches, canopies, pipe bridges, lighting columns and scaffolding. A driver who is not satisfied about overhead clearance will, correctly, refuse to tip.

Once the container is down, allow room for the rear doors to swing fully open if you plan to walk or drive materials in, and for whatever plant you are loading with to reach the sides. Keep it clear of fire exits, hydrants, emergency routes and building walls where a fire in the waste could spread.

What to send us with your enquiry

The more we know up front, the more reliable the quote. When you use the quote form or call 0333 121 1056, it helps to have:

  • the full site postcode and the entrance the lorry should use
  • a few photographs of the gateway, the route and the intended position
  • the surface type and any slopes, drains or covers nearby
  • anything overhead, including cables and trees
  • opening hours and any delivery time restrictions
  • the waste you are loading and how you will load it

We pass this to the licensed local partner, who confirms whether the size you want can be placed there. Keep loads below the top edges too: an overfilled or overweight container cannot be collected.

Useful for

  • Site managers
  • Facilities teams
  • Yard and transport supervisors
  • Contractors planning a site set-up
  • First-time RORO hirers

RORO Delivery and Access Requirements – your questions answered

Can’t see your question? Call 0333 121 1056 or send us a message.

How much room does a hook-loader need to deliver a RORO?

It depends on the container size and the vehicle the local partner runs, so we do not quote a standard figure. As a guide, the lorry needs a straight approach in line with the drop position plus room to pull away. Send photographs with your enquiry and the space is checked before booking.

Will the container mark or damage my yard surface?

Steel rollers and a heavy vehicle can scuff or crack surfaces that were not built for goods traffic, particularly block paving and thin tarmac. Concrete yards generally cope well. If you are concerned, mention it when you enquire so the partner can advise on timber or other protection under the contact points.

Does someone have to be on site when the RORO arrives?

It is strongly advisable. Someone who knows the site can unlock gates, show the driver the agreed position, move vehicles and confirm which way the doors should face. The driver still decides on the day whether a placement is safe.

What are the options if a hook-loader cannot reach my site?

There are usually alternatives. Smaller conventional skips arrive on more compact skip-loader lorries, a grab lorry can load loose material from the roadside, and a man and van collection suits sites with no room for a container at all.

Often booked with RORO Delivery and Access Requirements

Need more than one service for the same project? Add them to one enquiry and we’ll coordinate them together.

Get a quote

Get a Quick Quote

Tell us the site postcode, the waste, the container size if you know it, and when you need it. Mention exchanges, other sites or specialist waste and we will include them. Photos of the waste and the access help.

Prefer to talk? 0333 121 1056

ROROSkipHire.com is operated by Waste Cloud Ltd. Services are coordinated centrally and carried out by licensed local waste management and haulage partners across England, Scotland and Wales.