Industrial Waste Skips and RORO Containers
Containers for the steady, predictable waste that factories, workshops and process sites produce, exchanged to a rhythm that suits production.
- Licensed local partners across England, Scotland and Wales
- Waste paperwork provided with every job
- Free, no-obligation quotes
Unlike a building project, a factory produces waste every working day, in roughly the same quantities and of roughly the same kind. Offcuts, trimmings, rejected product, worn tooling, packaging from incoming materials and sweepings from the floor all accumulate at a rate that production managers can usually predict to within a container a month.
That predictability makes industrial premises natural users of roll-on roll-off containers. A container stands at a loading point, fills over a known period and is swapped for an empty one before it becomes a problem. We arrange industrial waste skips in every RORO size, with exchanges on request or on a fixed pattern, carried out by licensed local partners.
The complication is that industrial waste is defined by where it comes from, not what it is. Some of it is ordinary non-hazardous material; some is hazardous and must never enter a mixed container.
Describing a process waste correctly
Before any industrial stream is collected it has to be classified: what it is, which process produced it and whether it has any hazardous property. That description, with the relevant waste code, goes on the transfer note and determines where the load can be taken. If you have safety data sheets for the raw materials, or a previous analysis of the waste, send them with your enquiry. Vague descriptions such as “factory waste” are the main cause of delays, because the receiving facility cannot accept a load it cannot identify. A sample or photograph often settles the question quickly.
Container choice by density
Size follows weight. Dense outputs such as foundry sand, grinding residues, ceramics or heavy metal offcuts belong in a 20-yard container and may still need to travel part-filled. Mixed production waste of moderate density suits the 25-yard and 30-yard sizes. Light, voluminous material such as foam trim, film, strapping and empty packaging fills a 40-yard or 50-yard RORO without approaching the weight limit. Limits vary by container and local partner and are confirmed with your quote. If a stream is new to the site, start with a smaller container and review after the first few exchanges.
Fitting exchanges around production
A full container that blocks a despatch bay costs more than the waste service itself. Sites with a steady output often move from ad hoc calls to scheduled RORO collections, where exchanges happen on agreed days, or keep a second container on site so there is always somewhere to tip. For plants with shutdown periods, extra containers can be booked for the maintenance window, when strip-outs and deep cleans generate several weeks of waste in a few days. Timing is subject to local availability and confirmed when you book.
Open, enclosed or segregated
Open containers are loaded quickly by forklift tipping skip or conveyor. Where the waste is dusty, light enough to blow about or needs to stay dry, an enclosed RORO container is the better choice. Many sites run separate containers for metal, timber and cardboard alongside one for residual waste, which keeps recyclable material clean and makes each load simple to describe. Our waste segregation service looks at what a site produces and how the compound could be laid out. Even a simple change, such as moving the cardboard container closer to goods-in, can alter how well a site sorts.
Hazardous industrial waste is a separate service
Cutting fluids, oils, solvents, paints, acids, contaminated rags and absorbents, chemical containers with residues, sludges and filter cakes with hazardous properties cannot be placed in a standard mixed-waste RORO skip. They are packaged and collected through our hazardous waste service under consignment notes; in Scotland this category is called special waste. Liquids of any kind are unsuitable for an open container. Related routes exist for oils and fuels and for paints and solvents, all listed under specialist waste collections. When a factory is being emptied altogether, hazardous items are identified and removed first, before general clearance begins.
Non-hazardous industrial waste commonly accepted
- Production offcuts and trimmings
- Rejected or off-specification product
- Packaging from incoming materials
- Pallets, crates and timber
- Clean metal offcuts and swarf, drained and dry
- Rubber, textile and foam trim
- Floor sweepings free of hazardous residues
- Redundant non-electrical fixtures
Not accepted in a mixed industrial container
- Oils, coolants and cutting fluids
- Solvents, paints, inks and adhesives
- Acids, alkalis and other chemicals
- Oily rags, absorbents and filters
- Drums or containers holding residues
- Sludges, slurries and any free liquid
- Batteries, electrical equipment and lamps
- Gas cylinders and aerosols
- Asbestos-containing gaskets or lagging
Not sure? See our waste types guide or ask us when you book.
Typical users
- Engineering works
- Food and drink production (packaging waste)
- Plastics and rubber processors
- Print and packaging plants
- Vehicle and plant workshops
- Process industry shutdowns
Industrial Waste – your questions answered
Can’t see your question? Call 0333 121 1056 or send us a message.
Is industrial waste always hazardous?
No. Much of it is ordinary non-hazardous material such as offcuts and packaging. Whether a particular stream is hazardous depends on its composition and properties, which is why each one is assessed and coded individually before collection.
Can metal swarf go in a RORO container?
Dry, drained swarf can, ideally in a dedicated metal container. Swarf wet with cutting fluid is a different matter: free liquid must not leak from a container in transit, and oily material may be classed as hazardous. Tell us how the swarf is produced and stored.
Can you service several factories under one arrangement?
Yes, enquiries for more than one site are coordinated by the same central team, with a licensed local partner carrying out the work at each location. See multi-site RORO hire for how that is set up. Availability is checked against each postcode.
What is the difference between a transfer note and a consignment note?
A waste transfer note records the handover of non-hazardous waste. A consignment note is the more detailed document required for hazardous waste, tracking it from producer to final facility. A site producing both kinds will hold both sets of paperwork.
Often booked with Industrial Waste
Need more than one service for the same project? Add them to one enquiry and we’ll coordinate them together.
Get a Quick Quote
Tell us the site postcode, the waste, the container size if you know it, and when you need it. Mention exchanges, other sites or specialist waste and we will include them. Photos of the waste and the access help.
ROROSkipHire.com is operated by Waste Cloud Ltd. Services are coordinated centrally and carried out by licensed local waste management and haulage partners across England, Scotland and Wales.