RORO skip hire acrossEnglandScotlandWales
0333 121 1056
Aggregates · Sub-Base

MOT Type 1 Sub-Base Delivery

Graded crushed rock that compacts into a dense, load-bearing layer beneath paving, slabs, roads and hardstandings.

MOT Type 1 0333 121 1056
  • Licensed local partners across England, Scotland and Wales
  • Waste paperwork provided with every job
  • Free, no-obligation quotes
Get a Quick Quote

MOT Type 1 is the sub-base most specifications ask for by name. It is crushed rock, commonly limestone or granite depending on what is quarried in the region, graded from coarse pieces down to dust. That spread of particle sizes is the point: when the layer is compacted, the fines lock the larger stone together and the result is a dense platform that spreads load into the ground beneath.

The name comes from the old Ministry of Transport specification for road sub-base, and the term has stuck across the construction trade. We arrange Type 1 as loose loads through local aggregates partners, delivered by tipper or grab lorry according to the quantity and the access. The rock type and the source depend on where your site is, so both are confirmed when we quote.

Where Type 1 is used

Anywhere a finished surface needs a firm, even foundation. Typical jobs include driveways and block paving, patios, footpaths, car parks, estate roads, yard hardstandings and the layer beneath a concrete slab. It is also used to make up levels inside a building footprint before the floor goes down, and to form access tracks that have to carry delivery vehicles through a build.

If the slab is being poured afterwards, the sub-base and the concrete delivery can be planned together so the pour is not left waiting on stone. On drainage-led designs such as permeable paving, the designer will normally call for a more open, reduced-fines material instead, so check the drawing before ordering.

Working out a quantity

Suppliers sell Type 1 by weight, but sites think in area and depth. Measure the length and width of the area, decide the compacted depth the design calls for, and multiply the three together to get a volume. The supplier converts that volume to weight using the density of the particular rock, which is why the same hole needs a slightly different order in different parts of the country.

Add a margin for compaction, because loose stone settles noticeably once a plate or roller has been over it, and for uneven formation levels. Give us the dimensions and the intended depth and the partner will advise on the load. Ordering a little over is normally cheaper than a second small delivery.

Delivery and tipping on site

A loose load is tipped in one heap, so decide in advance where that heap should go. The best position is on or beside the area being filled, on ground firm enough to take a loaded lorry, with clear headroom for a raised tipper body. Soft verges, new kerbs, manhole covers and shallow services are the usual casualties when this is not thought through.

Where a tipper cannot get close, a grab lorry may be able to reach over a boundary and place the stone where it is wanted. Vehicle sizes and the room they need vary by partner and are confirmed with your quote, so describe gates, slopes and overhead lines when you enquire.

Laying it properly

Type 1 performs only if it is compacted, and it compacts best in thin layers; a deep fill tipped and rolled once will be hard on top and loose underneath. The formation beneath should be stripped of topsoil and soft spots first, and many designs include a geotextile to stop the stone punching into clay.

That excavation produces spoil. Soil and clay are dense, so they are removed by muck away tippers or grab hire; a large container would reach the vehicle’s legal weight limit long before it was full. Small quantities can go in a conventional skip.

Primary rock or recycled

Quarried Type 1 is the default where a specification is strict or the engineer wants a known source. On many private and commercial jobs a recycled Type 1 made from crushed demolition arisings is accepted and does the same structural job. For less demanding fill, haul roads and piling mats, crushed concrete is often chosen. If you are unsure which your drawings permit, tell us what the specification says and we will ask the local partner what they can supply against it. Mixing sources within one layer is best avoided, so settle the choice before the first load is booked.

Ideal for

  • Driveways and block paving
  • Slab and floor sub-base
  • Car parks and yards
  • Estate roads and footpaths
  • Site access tracks

MOT Type 1 – your questions answered

Can’t see your question? Call 0333 121 1056 or send us a message.

What does MOT stand for in MOT Type 1?

Ministry of Transport. The name refers to the government department whose road-building specification first defined this graded sub-base. The department has changed names since, but builders, merchants and engineers still use the term for crushed rock sub-base of this kind.

Is MOT Type 1 the same as hardcore?

Not quite. Hardcore is a loose term for broken brick, concrete and rubble used as fill, and its make-up is unpredictable. Type 1 is a manufactured product with a controlled range of particle sizes, which is why it compacts consistently and why engineers specify it by name.

Does Type 1 drain freely?

It lets some water through, but the fines that make it compact so well also slow drainage. Where a design relies on water passing through the sub-base, a reduced-fines material or clean drainage stone is normally specified. Follow the drawing or ask your designer.

Can the lorry that delivers Type 1 take spoil away?

It can sometimes be arranged, depending on the partner, the vehicle and whether a suitable tip is nearby. Tell us what needs to leave site when you request the delivery. Excavated material is waste and travels under a waste transfer note, separately from the aggregate paperwork.

Often booked with MOT Type 1

Need more than one service for the same project? Add them to one enquiry and we’ll coordinate them together.

Get a quote

Get a Quick Quote

Tell us the site postcode, the waste, the container size if you know it, and when you need it. Mention exchanges, other sites or specialist waste and we will include them. Photos of the waste and the access help.

Prefer to talk? 0333 121 1056

ROROSkipHire.com is operated by Waste Cloud Ltd. Services are coordinated centrally and carried out by licensed local waste management and haulage partners across England, Scotland and Wales.