Fluorescent Tube and Lamp Collection
Tubes and other gas-discharge lamps contain mercury and are classed as hazardous. We arrange boxed, documented collections through specialist licensed partners.
- Licensed local partners across England, Scotland and Wales
- Waste paperwork provided with every job
- Free, no-obligation quotes
Lighting upgrades produce an awkward waste stream. When a warehouse, school or office block swaps its old fittings for LED, hundreds or thousands of fluorescent tubes come down in a few days, each one a thin glass envelope holding a small dose of mercury and a coating of phosphor powder. Whole, a tube is easy to manage. Broken in the bottom of a skip, it releases mercury vapour and contaminates everything around it.
That is why fluorescent tubes are classified as hazardous waste – special waste in Scotland – and cannot be placed in a standard mixed-waste roll-on roll-off skip or any other general container. They are also waste electrical equipment, so they sit within the WEEE system. ROROSkipHire.com arranges lamp collections across England, Scotland and Wales through specialist licensed partners, either as a standalone job or alongside the containers handling the rest of a refit.
Which lamps count, and which do not
The restriction covers the whole family of gas-discharge lighting, not only the familiar straight tube. Circular and U-shaped tubes, compact fluorescent lamps, the sodium and metal halide lamps used in high-bay, floodlight and street lighting, mercury vapour lamps and many UV and germicidal tubes are all handled the same way.
LED tubes and lamps contain no mercury, but they are still electrical waste and should go with other WEEE rather than into mixed waste. Ordinary filament and halogen bulbs are the least problematic, though in commercial quantities they are best kept with the lamp collection too. If a project removes the fittings as well, note that control gear, emergency battery packs and, in older installations, capacitors may need separate treatment – emergency packs belong with batteries.
How relamping and strip-out jobs usually run
On a planned upgrade the electrical contractor de-lamps each fitting before it is taken down, placing tubes straight into rigid lamp containers supplied for the job. The emptied luminaires, trunking and ceiling grid are then non-hazardous in most cases and can go into the metal or mixed container on site – a 25-yard RORO is a common choice for bulky shopfitting waste. The lamp containers are collected separately once filled.
Problems arise when fittings are pulled down with the tubes still in them. Glass breaks unseen inside the load, and a container that should have been straightforward is reclassified at the receiving site. Agreeing the de-lamping step with whoever is doing the strip-out avoids that.
Storing tubes so they arrive intact
- Use purpose-made lamp containers – long rigid boxes often called coffins, or drums for compact lamps. The original cardboard sleeves are a reasonable short-term alternative.
- Keep containers indoors or under cover; wet cardboard collapses and tubes break.
- Do not tape tubes into bundles, stand them loose in a corner or stack other waste on top.
- Sweep up any breakage carefully, ventilate the area, and seal fragments and powder in a lidded container labelled as broken lamps. Tell us it is there.
- Never crush tubes to save space unless you hold the authorisation and equipment to do so.
For a site that changes lamps continually, a permanent container exchanged on request or to a schedule is usually simpler than ad hoc collections.
Consignment notes and producer responsibilities
Each collection of mercury-bearing lamps is documented on a hazardous waste consignment note, which the specialist partner prepares from your details and which you should keep with your other waste records. The note identifies the producer, the waste and the authorised facility receiving it. Your responsibility to store the waste safely, describe it accurately and use a registered carrier is part of the general duty of care on every business.
At the recycling plant, lamps are broken under controlled conditions so that mercury is captured and the glass, metal end caps and phosphor powder can be separated for recovery.
What we need to know
Use the quote form or ring 0333 121 1056 and tell us roughly how many lamps there are and of what type and length, whether they are already boxed or you need containers delivered, whether this is a one-off project or an ongoing arrangement, and where on the premises they will be stored. Mention any broken tubes. If fittings, cabling or other restricted items are coming out at the same time, list those as well – our specialist waste collections hub shows what else can be arranged.
Lamps we can arrange collection for
- Linear fluorescent tubes of any length
- Circular and U-shaped tubes
- Compact fluorescent lamps
- Sodium and metal halide lamps
- Mercury vapour lamps
- UV, germicidal and sunbed tubes
- Broken lamps sealed in a labelled container
Keep separate from the lamp container
- Light fittings and control gear – see WEEE and electrical waste
- Emergency lighting battery packs – see batteries
- Cardboard sleeves and packaging once emptied – see cardboard and packaging
- Ceiling tiles, grid and trunking – suitable for a RORO if free of restricted items
- Other mercury-containing equipment – see hazardous waste
Not sure? See our waste types guide or ask us when you book.
Who uses this service
- Electrical contractors
- LED upgrade projects
- Warehouses and distribution centres
- Schools, colleges and hospitals
- Retail and shopfitting strip-outs
- Facilities managers
Fluorescent Tubes – your questions answered
Can’t see your question? Call 0333 121 1056 or send us a message.
Can a handful of tubes go in the RORO with the rest of the strip-out waste?
No. There is no small-quantity allowance for hazardous lamps in a mixed-waste container. Even a few broken tubes can cause a load to be rejected or reclassified. Set them aside in their sleeves or a rigid box and we will arrange a separate collection.
Are LED tubes hazardous waste?
LED tubes and lamps do not contain mercury, so they are not treated as hazardous in the way fluorescent lamps are. They are still electrical waste, however, and belong in a WEEE collection rather than a general skip. Keeping them boxed separately from fluorescent tubes helps the recycler.
Do you supply containers for storing tubes?
Lamp containers can normally be supplied by the collecting partner, either for the length of a project or as a permanent arrangement. Availability and container types vary by area, so tell us the lamp lengths and likely numbers and we will confirm what can be provided for your postcode.
What should we do if a box of tubes has been crushed?
Avoid handling it more than necessary. Ventilate the space, keep people away from the dust, and place the damaged box and fragments inside a sealed, labelled container or heavy-duty bag. Let us know when you book so the partner brings suitable packaging and describes the waste correctly.
Often booked with Fluorescent Tubes
Need more than one service for the same project? Add them to one enquiry and we’ll coordinate them together.
Get a Quick Quote
Tell us the site postcode, the waste, the container size if you know it, and when you need it. Mention exchanges, other sites or specialist waste and we will include them. Photos of the waste and the access help.
ROROSkipHire.com is operated by Waste Cloud Ltd. Services are coordinated centrally and carried out by licensed local waste management and haulage partners across England, Scotland and Wales.