RORO skip hire acrossEnglandScotlandWales
0333 121 1056
Waste Types · Scrap Metal

Scrap Metal Containers and RORO Skip Hire

Ferrous and non-ferrous scrap kept clean, secure and separate, in a container sized for its weight rather than its volume.

Scrap Metal 0333 121 1056
  • Licensed local partners across England, Scotland and Wales
  • Waste paperwork provided with every job
  • Free, no-obligation quotes
Get a Quick Quote

Metal can be melted and remade indefinitely, which is why scrap is one of the few waste streams with a market value of its own. That value depends on the metal being clean and sorted. Steel tangled with timber, insulation and plastic is a mixed-waste problem; the same steel in its own container is a commodity.

Scrap arises wherever things are made, maintained or taken apart. Fabricators produce plate offcuts and punchings. Engineering shops generate turnings and redundant tooling. Warehouse refits release racking and mezzanine steel; demolition yields beams, reinforcement, cable and pipework; fleet workshops accumulate brake discs, exhausts and body panels.

We arrange roll-on roll-off containers for scrap through licensed local partners. The first question we ask is what kind of metal and in what form, because with scrap the weight of the load, not the size of the container, sets the limit.

Ferrous and non-ferrous: why the split matters

Ferrous metals, meaning iron and the many grades of steel, make up most scrap by weight and are picked out easily with a magnet. Non-ferrous metals such as aluminium, copper, brass, lead and stainless steel are produced in smaller quantities but are worth more for their weight, and mixing them into a steel load loses that difference. Sites producing both commonly keep a RORO for steel and smaller stillages, bins or a conventional skip for non-ferrous. Whether any rebate applies depends on grade, quantity and market conditions and is confirmed case by case.

Sizing by density, not by eye

Plate, billet ends, castings, machine parts and reinforcing bar are extremely dense. A 20-yard RORO is the appropriate container, and it may reach the vehicle’s legal weight limit well before it is full. Light-gauge material is the opposite: ducting, cladding sheets, cable tray, racking, lockers and wire mesh take up a great deal of space for little weight and suit a 30-yard or 40-yard container. The 50-yard size is rarely appropriate for metal. Weight limits vary by container and local partner and are confirmed with your quote. Tell us whether the load is heavy or light gauge.

Protecting a valuable load

An open container of copper cable or aluminium in an unattended yard is a temptation. Lockable RORO containers with secured lids or doors reduce the risk of theft, and siting the container within a fenced, lit area helps further. Legitimate scrap dealers are not permitted to pay cash for scrap metal, and each movement is recorded on a waste transfer note, so a properly arranged collection leaves a clear audit trail showing where your metal went. Keep your copies of the paperwork with the rest of your duty of care records.

Preparing scrap before it goes in

A little preparation avoids rejected loads. Drain oils, coolants and fuel from machinery and tanks, and remove batteries. Take lamps out of light fittings. Make sure pipework and vessels are open and empty, since sealed or pressurised items are dangerous in a shredder. Strip off substantial non-metal attachments where practical. Swarf should be drained and dry. Long sections need cutting so that nothing protrudes above or beyond the container, which has to be sheeted or netted for transport. Photographs of unusual or oversized items help the local partner plan the collection.

Items that look like scrap but need another route

Several metal-rich items cannot be placed in a scrap or mixed-waste RORO skip. Fridges, freezers and air-conditioning units contain refrigerant gases. Electrical appliances and control panels are WEEE. Lead-acid and lithium batteries are hazardous. Gas cylinders and fire extinguishers are pressurised. Each has a dedicated page under specialist waste collections, and we can arrange those collections alongside your scrap container. End-of-life vehicles also follow their own regulated process and should not be loaded into a container. Sorting these items out before the scrap is collected avoids a load being turned away, and tells you early how many separate collections the clearance will need.

Accepted as scrap metal

  • Steel beams, plate, bar and offcuts
  • Racking, shelving and mezzanine steel
  • Sheet, cladding and ducting
  • Cable tray, conduit and pipework (empty)
  • Aluminium extrusions and sheet
  • Copper, brass and lead, ideally segregated
  • Drained machinery and engine parts
  • Dry swarf and turnings

Not accepted in a scrap container

  • Fridges, freezers and air-conditioning units
  • Electrical appliances, motors with capacitors and other WEEE
  • Batteries of any type
  • Gas cylinders, aerosols and fire extinguishers
  • Sealed or pressurised vessels
  • Tanks or drums containing oil, fuel or chemical residue
  • Items contaminated with asbestos
  • General waste, timber and plastics
These items can’t go in a standard RORO skip, but we can arrange a separate specialist collection.Get a quote →

Not sure? See our waste types guide or ask us when you book.

Typical users

  • Steel fabricators
  • Engineering and machine shops
  • Demolition and strip-out contractors
  • Warehouse refit teams
  • Vehicle and plant workshops
  • Facilities managers

Scrap Metal – your questions answered

Can’t see your question? Call 0333 121 1056 or send us a message.

Will we be paid for our scrap metal?

Possibly. Whether a rebate applies, and how much, depends on the type and grade of metal, how clean and well sorted it is, the quantity and the market at the time. No figure can be given in advance of knowing the material. Describe it when you enquire and the position will be confirmed with your quote.

Can mixed metals go in one container?

Yes, a mixed-metal load is accepted and sorted after collection. Keeping non-ferrous metals apart from steel preserves more of their value, so separation at source is worthwhile if you produce them in any quantity.

We only have a small amount of scrap. Is a RORO necessary?

Probably not. For a one-off pile or modest regular quantities, a scrap metal collection by vehicle or a conventional skip is more proportionate. RORO containers suit sites producing scrap continuously or clearing a building.

Can old cable go in the scrap container?

Loose cable stripped out during refurbishment or demolition is normally accepted as scrap. Cable still attached to appliances or equipment is part of that item and is treated as WEEE. Tell us roughly how much cable there is, as it is usually kept apart from steel.

Often booked with Scrap Metal

Need more than one service for the same project? Add them to one enquiry and we’ll coordinate them together.

Get a quote

Get a Quick Quote

Tell us the site postcode, the waste, the container size if you know it, and when you need it. Mention exchanges, other sites or specialist waste and we will include them. Photos of the waste and the access help.

Prefer to talk? 0333 121 1056

ROROSkipHire.com is operated by Waste Cloud Ltd. Services are coordinated centrally and carried out by licensed local waste management and haulage partners across England, Scotland and Wales.