Plastic Waste RORO Containers
Containers for film, rigid plastics and production scrap, arranged around the polymer types your site actually produces.
- Licensed local partners across England, Scotland and Wales
- Waste paperwork provided with every job
- Free, no-obligation quotes
Plastic is not one material but a family of them, and the family members do not recycle together. Polythene film, polypropylene crates, PVC window frames and expanded polystyrene each go to different reprocessors, and a container holding all four is worth a good deal less to a recycler than four clean loads.
For most businesses the stream divides into packaging and product. Packaging plastics are the stretch wrap, pallet covers, bags, strapping and tubs that come in with deliveries. Product plastics are the items themselves at the end of their life or off the production line: crates, trays, pipes, drums, mouldings, sprues, purgings and rejects.
Nearly all of it is light and bulky, so it fills large containers by volume alone. We arrange roll-on roll-off container hire for plastics through licensed local partners, and the first thing we need to know is which plastics you have and how clean they are.
Film and flexible plastics
Stretch wrap and polythene film are produced in quantity by any site that breaks down palletised deliveries. Clean, clear film is the most sought-after grade; coloured or printed film ranks lower, and film contaminated with labels, tape, food or grit lower still. Loose film is awkward: it springs back when compressed and blows away at the first opportunity. An enclosed RORO container keeps it in place, and sites with a baler can produce film bales for collection. Our warehouse waste guide covers film alongside the other goods-in streams. Keep strapping out of the film.
Rigid plastics
Crates, trays, buckets, bins, pallets, pipe offcuts, guttering, window frames and garden furniture fall under the rigid heading. They nest badly and waste space, so the 40-yard RORO and 50-yard RORO are the usual sizes. Construction sites generating large amounts of pipe and ducting offcuts, or installers removing uPVC frames, may fill a 35-yard container over the course of a project. Glass must be removed from frames first. Weight is seldom the limiting factor, but limits are still confirmed with your quote. Stack crates and nest buckets where you can; it adds up over a full load.
Production scrap from plastics processors
Injection moulders, extruders and thermoformers generate sprues, runners, start-up purgings, edge trim and rejected parts. Much of this is a single known polymer and has good recycling prospects when kept clean and labelled, so processors often run one container per material. Purgings and lumps are denser than finished parts and may call for a smaller container. Give us the polymer names, the form the scrap takes and the quantity each month. The manufacturing waste page describes how segregated containers fit into a production site. Keep floor sweepings and contaminated material out of these containers.
Drums, IBCs and containers that held something
An empty plastic drum is only plastic waste if it is truly empty and what it held was harmless. Containers with residues of oils, solvents, paints, pesticides or other chemicals are hazardous waste and cannot be placed in a plastics or mixed-waste RORO skip. They are collected under consignment notes through the hazardous waste route within our specialist waste collections, and farm chemical containers through agricultural chemicals. If you are unsure, keep the items aside and send us the product labels. Sound IBCs and drums are often taken back by the supplier for reuse, which is worth checking first.
Mixed plastics and smaller quantities
Where sorting by type is impractical, mixed rigid plastics can often still be collected as one stream, though the range of outlets is narrower and acceptance depends on the local partner’s facility. Bottles, tubs and pots from staff areas belong in mixed recycling bins instead of a RORO. For occasional loads, a commercial recycling collection by vehicle avoids hiring a container that would stand half empty. As a rule of thumb, the more consistent the material, the more a dedicated container is justified; the more varied and occasional it is, the better a collection or bin service will suit. We check both against your postcode.
Plastics commonly accepted
- Stretch wrap, pallet hoods and polythene film
- Crates, trays, buckets and plastic pallets
- Pipe, conduit, guttering and ducting offcuts
- uPVC window and door frames with glass removed
- Sprues, runners, trim and rejected mouldings
- Strapping and banding
- Empty, clean, non-hazardous drums and tubs
- Expanded polystyrene, ideally kept separate
Not accepted with plastic waste
- Drums or IBCs with chemical, oil or paint residue
- Pesticide and agricultural chemical containers
- Electrical items with plastic casings
- Vapes and anything containing a battery
- Tyres and rubber products
- Plastics contaminated with food or clinical waste
- Sealant and foam cartridges with contents
- Glass, timber, metal and general rubbish
Not sure? See our waste types guide or ask us when you book.
Typical users
- Distribution and fulfilment centres
- Plastics moulders and extruders
- Window and door installers
- Food and drink packers
- Builders and drainage contractors
- Growers and garden centres
Plastic Waste – your questions answered
Can’t see your question? Call 0333 121 1056 or send us a message.
Do we have to sort plastics by type?
It is not always compulsory, but sorted plastics are far easier to recycle. At minimum, keep film apart from rigid plastics and keep both free of other waste. Single-polymer production scrap should always stay separate. We will advise on a practical level of sorting for your site.
Can polystyrene be recycled?
Clean expanded polystyrene packaging can be recycled where a suitable facility exists, usually after compaction. It is extremely light and bulky, so it needs to be kept on its own in bags or an enclosed container. Availability of an outlet is checked against your postcode.
Are plastic-cased electricals plastic waste?
No. Anything with a plug, a battery or a circuit board is electrical waste whatever its casing is made from, and goes through our WEEE and electrical waste collection. This includes toys, tools, lighting and disposable vapes.
How clean does plastic need to be?
Free of obvious food, soil, liquids and non-plastic attachments. Light dust and the odd label are tolerated; a drum with product still in it, or film wrapped around rubbish, is not. Cleaner loads have more outlets, so a little care at the point of disposal pays off.
Often booked with Plastic Waste
Need more than one service for the same project? Add them to one enquiry and we’ll coordinate them together.
Get a Quick Quote
Tell us the site postcode, the waste, the container size if you know it, and when you need it. Mention exchanges, other sites or specialist waste and we will include them. Photos of the waste and the access help.
ROROSkipHire.com is operated by Waste Cloud Ltd. Services are coordinated centrally and carried out by licensed local waste management and haulage partners across England, Scotland and Wales.