16 Yard RORO Skip Hire
A low-sided hook-lift container for strip-out, refurbishment and weightier mixed building waste, currently offered in the Newcastle area only. Elsewhere the nearest alternative is the 20-yard RORO.

Sixteen cubic yards is a familiar figure in waste, because large conventional skips are made in that size too. The roll-on roll-off version is a different piece of equipment: a long, low container with a nominal volume of about 12.2 m³, moved by a hook-loader lorry and set down on the ground in one smooth movement. Many versions have a rear door, so waste can be walked or wheeled in. This size is currently offered in the Newcastle area only; elsewhere the nearest alternative is the 20-yard RORO.
In practice the 16 does the same work as the 15-yard RORO, and which of the two is supplied usually comes down to what the local partner holds. Both sit at the compact end of the RORO size range and both are favoured where waste is too dense for a tall container.
RORO container or 16-yard skip
Customers often ask which they should have. A conventional 16-yard skip is short and tall, lifted on chains by a skip-loader, and can sometimes be placed where a hook-loader cannot manoeuvre. The 16-yard RORO is longer and lower, which makes it far easier to load by hand, and it is the natural choice when the site will later move up to larger containers, since the same class of vehicle serves the whole range.
Give us the access details and the waste description and we will say which can be arranged locally. Where neither suits, wait-and-load may be an option.
Where the 16-yard size earns its place
Soft strip of offices and shops ahead of a refit is a classic use: ceiling grids, carpet tiles, stud partitions, joinery and redundant fixtures, with some heavier screed or blockwork mixed through. Roofing contractors use it for felt, battens and tiles. Maintenance teams on housing estates use it as a central drop point during a programme of void clearances, where each flat yields a little of everything.
For demolition waste proper, with large volumes of masonry, the 16 is only suitable part-filled. Crushing on site or rubble removal by grab lorry normally moves that material more efficiently.
Separating materials at source
One 16-yard container for everything is simple, but two smaller streams can cost less overall. Metal has a value and is worth keeping apart as scrap metal. Clean timber can go for wood recycling. Plasterboard must be kept out of the mixed load in any case, because gypsum cannot be sent for disposal alongside ordinary waste.
On tight sites there may not be room for several containers. In that situation tell us the dominant material and we will suggest a sensible split, perhaps a RORO for the mixed fraction and bags or a small skip for plasterboard.
Restricted and hazardous items
Strip-out work regularly turns up things that cannot share a container with general waste. Fluorescent tubes from old light fittings, redundant air-conditioning units, fridges from staff kitchens, fire extinguishers and part-used paint all need their own collection. Anything suspected to contain asbestos must be left alone until it has been assessed.
We arrange these through the appropriate route so they are documented correctly: see fluorescent tubes, WEEE and electrical waste and the wider specialist collections section. Flag them at quote stage and they can be scheduled around the container.
Site access, loading and paperwork
A hook-loader needs firm ground, adequate width and height along the route, and a clear length in front of the container position to roll it off. Those requirements vary by container and local partner and are confirmed with your quote. If the only available space is on the public road, permission from the local council is required and is frequently not granted for containers of this type; our note on RORO skip permits explains why.
Load level with the top of the sides at most, and keep heavy items low and evenly spread. Each collection is covered by a waste transfer note describing the load.
Suitable contents for a 16-yard RORO
- Soft strip waste: ceilings, partitions and flooring
- Roofing felt, battens and a controlled quantity of tiles
- Joinery, doors and kitchen units
- Mixed building waste with some masonry
- Metal fixtures, ducting and racking parts
- Site packaging and general rubbish
Not for a mixed 16-yard container
- Any asbestos-containing material
- Plasterboard unless in a dedicated load
- Fluorescent tubes and lamps
- Fridges, air-conditioning units and other electricals
- Paint, solvents, oils and fuels
- Gas cylinders and fire extinguishers
- Upholstered seating that may contain POPs
Not sure? See our waste types guide or ask us when you book.
Ideal for
- Soft strip and fit-out
- Roofing contractors
- Void property programmes
- Shop and office refits
- Small demolition jobs
16 Yard RORO Skip Hire – your questions answered
Can’t see your question? Call 0333 121 1056 or send us a message.
Is there any real difference between a 15 and a 16-yard RORO?
Very little in use. The nominal volume differs by a single cubic yard and both are low-sided containers for the same kinds of waste. The choice is normally made by what the local partner stocks. If you need a specific internal size for a particular item, tell us and it will be checked.
Does a 16-yard RORO have a door?
Many do, typically at the rear, which allows walk-in loading with barrows or sack trucks before the door is closed for transport. Door arrangements differ between containers, so if walk-in access matters for your job, mention it when you ask for a quote and we will confirm what can be supplied.
Can upholstered furniture go in with strip-out waste?
Sofas, armchairs and other upholstered domestic seating may contain persistent organic pollutants and must be handled separately from mixed waste. We arrange this through POPs upholstered furniture collections. Hard furniture such as desks and shelving is fine in the container.
Where is the 16-yard RORO available, and how do I book one?
The 16-yard RORO is currently offered in the Newcastle area only; elsewhere the nearest alternative is the 20-yard RORO. Send the site postcode, a description of the waste, the quantity you expect and any access constraints through the quote form, or call 0333 121 1056. We check availability with licensed local partners and come back with a confirmed price and delivery arrangement.
Often booked with 16 Yard RORO Skip Hire
Need more than one service for the same project? Add them to one enquiry and we’ll coordinate them together.
Get a Quick Quote
Tell us the site postcode, the waste, the container size if you know it, and when you need it. Mention exchanges, other sites or specialist waste and we will include them. Photos of the waste and the access help.
ROROSkipHire.com is operated by Waste Cloud Ltd. Services are coordinated centrally and carried out by licensed local waste management and haulage partners across England, Scotland and Wales.