RORO skip hire acrossEnglandScotlandWales
0333 121 1056
Waste Types · Wood and Timber

Wood and Timber Waste RORO Skip Hire

Dedicated containers for pallets, offcuts, joinery waste and site timber, with treated and hazardous wood kept on a separate route.

Wood & Timber Waste 0333 121 1056
  • Licensed local partners across England, Scotland and Wales
  • Waste paperwork provided with every job
  • Free, no-obligation quotes
Get a Quick Quote

Timber is one of the easiest materials to recover, provided it is kept on its own and described honestly. Clean wood is chipped for animal bedding, landscaping products and panel board; lower grades become biomass fuel. Mix it into a general load and most of that value disappears.

Waste wood arrives from many directions. Joinery shops and furniture makers produce offcuts and panel trimmings daily. Warehouses and distribution centres shed broken pallets and crates. Construction sites discard shuttering, packing timbers and old joists; demolition adds doors, floorboards and roof timbers. Volumes are high and the material is awkward rather than heavy, which is exactly what roll-on roll-off containers are designed for.

We arrange wood-only RORO containers through licensed local partners, and will ask what kind of timber you have before recommending a size.

Understanding wood grades

The recycling industry sorts waste wood into four broad grades. Grade A is clean, untreated material such as pallets, packing cases and solid offcuts. Grade B is a mixed feedstock that includes some panel products and timber from construction and demolition. Grade C contains a higher share of chipboard, MDF, plywood and coated or laminated material, and is generally used as fuel. Grade D is hazardous: timber treated with preservatives such as creosote or copper-chrome-arsenic. Knowing roughly which grade you have lets us route the load properly from the outset.

Which container for which timber

Whole pallets and bulky joinery waste trap a lot of air, so they need volume. A 40-yard RORO is the workhorse for pallets and site timber, and the 50-yard container suits warehouses clearing light pallets and crates in quantity. Dense loads change the picture: sawn hardwood offcuts, stacked sheet material or wet timber weigh considerably more, and a 30-yard RORO or smaller is the safer choice. Payloads vary by container and local partner and are confirmed with your quote. Wood stored outdoors through winter is noticeably heavier than dry stock.

Loading for a full, legal container

How timber is loaded makes a large difference to how much fits. Breaking down pallets, laying long lengths flat and placing sheet material against the sides all reduce voids. Nothing may project above the top of the container or over the sides, however tempting it is to stand a last few boards on end, because the load is netted or sheeted before it moves. Nails, screws and metal fixings left in timber are normally acceptable; they are removed magnetically during processing. Glass should be taken out of doors and windows before the frames are loaded.

Treated, painted and older timber

Railway sleepers, telegraph poles, old fencing and agricultural timber treated with creosote or similar preservatives are hazardous and cannot go in a standard wood or mixed-waste RORO skip. They are consigned through the hazardous waste route within our specialist waste collections. Certain external and structural timbers removed from older buildings may also need assessment before they can be classed as non-hazardous, so mention the age of the building and where the wood came from when you enquire. Painted and varnished interior joinery is normally accepted as lower-grade wood. If in doubt, keep suspect timber in a separate stack until it has been identified.

Regular arisings and smaller loads

A workshop producing a few bags of offcuts a week will not fill a RORO quickly enough to justify the space. For modest quantities, or for a stack of pallets building up behind a unit, a pallet and timber collection clears the material by vehicle without leaving a container. Sites with constant output can set up exchanges on a fixed cycle through long-term RORO hire. Where timber is only one part of a wider clear-out, it can travel in a mixed-waste container instead, although it will not then be graded as clean wood. We can price both approaches for comparison.

Accepted in a wood-only container

  • Pallets, crates and packing cases
  • Sawn timber offcuts
  • Chipboard, MDF, OSB and plywood
  • Doors, frames, skirting and flooring
  • Shuttering and site hoarding
  • Painted or varnished interior joinery
  • Kitchen carcasses and worktops
  • Timber with nails and small metal fixings

Not accepted with wood waste

  • Creosoted sleepers, poles and fencing
  • Timber treated with CCA or similar preservatives
  • Wood contaminated with oil or chemicals
  • Upholstered furniture
  • Plasterboard or laminated plasterboard panels
  • Glass left in window frames and doors
  • Green waste, logs with soil and tree stumps
  • General rubbish and packaging
These items can’t go in a standard RORO skip, but we can arrange a separate specialist collection.Get a quote →

Not sure? See our waste types guide or ask us when you book.

Typical users

  • Joinery and furniture workshops
  • Pallet users and distribution centres
  • Housebuilders
  • Shopfitters
  • Demolition contractors
  • Exhibition and event builders

Wood & Timber Waste – your questions answered

Can’t see your question? Call 0333 121 1056 or send us a message.

Do pallets have to be broken up before loading?

No, whole pallets are accepted. Breaking or stacking them neatly simply fits more into each container and reduces the number of exchanges. Reusable pallets in good condition may be worth offering back to your supplier before treating them as waste.

Can MDF and chipboard go in with solid timber?

Yes, in most cases a wood container can take panel products alongside solid timber, and the load is graded accordingly. If you want the cleanest grade recognised, keep untreated solid wood and pallets separate from panel products. Tell us the mix when you ask for a quote.

Are tree branches and logs classed as wood waste?

Not for this purpose. Branches, brash, logs and stumps are green waste, which goes to composting or biomass by a different route. Mixing vegetation into a timber container downgrades the load.

How should we dispose of old railway sleepers?

Creosote-treated sleepers are hazardous waste. They must be kept out of general and wood-only containers and moved under a consignment note to a facility permitted to take them. Contact us on 0333 121 1056 with the quantity and location and we will arrange a suitable collection, subject to local availability.

Often booked with Wood & Timber Waste

Need more than one service for the same project? Add them to one enquiry and we’ll coordinate them together.

Get a quote

Get a Quick Quote

Tell us the site postcode, the waste, the container size if you know it, and when you need it. Mention exchanges, other sites or specialist waste and we will include them. Photos of the waste and the access help.

Prefer to talk? 0333 121 1056

ROROSkipHire.com is operated by Waste Cloud Ltd. Services are coordinated centrally and carried out by licensed local waste management and haulage partners across England, Scotland and Wales.