Pallet & Timber Collection
Surplus and broken pallets, crates, offcuts and site timber collected from your premises and sent for reuse or wood recycling by licensed local partners.
- Licensed local partners across England, Scotland and Wales
- Waste paperwork provided with every job
- Free, no-obligation quotes
Pallets arrive under every delivery and leave far less often. Within a few months a goods-in yard can hold a leaning stack that blocks a fire exit, soaks up rain and gives the insurer something to write about. Timber offcuts on building sites and in joinery shops accumulate in much the same way.
A pallet and timber collection deals with the stack in a single visit. ROROSkipHire.com takes your enquiry, checks which licensed local partners cover your postcode, and arranges for a vehicle and crew to load the wood and take it to an authorised facility. Sound pallets may go on for reuse or repair; broken ones and general timber are normally sent for wood recycling. No container is left behind, which suits premises with little yard space. For sites that produce wood continuously, a roll-on roll-off container is often the better arrangement, and we cover that comparison below.
Pallets: reuse first, recycling second
A standard-sized pallet in good condition is still a useful object, and partners who handle them will usually sort for reuse before anything is chipped. Odd sizes, one-way lightweight pallets and broken ones go for recycling with other wood. Stacking by type before the visit, with whole pallets in one pile and damaged ones in another, speeds the loading and helps the partner describe the load correctly.
Check for coloured or branded pallets belonging to a hire pool. These remain the property of the pool operator and should be returned through that scheme rather than disposed of, so set them aside. Plastic pallets are a different material entirely and are handled as plastic waste.
Timber grades and why the description matters
Wood recyclers sort waste timber broadly by how clean it is. Untreated packaging wood such as pallets and crates sits at the top. Below that comes mixed construction and demolition timber, then lower-grade material with a high proportion of chipboard, MDF, laminate and painted wood.
For you, the practical point is to describe what you have. A load of clean pallet wood and a load of stripped-out kitchen carcasses are both acceptable, but they are not the same waste. The wood and timber waste page sets out the categories in more detail, and painted or coated timber from older buildings should always be mentioned.
Treated and hazardous wood
Some timber cannot go with an ordinary wood load at all. Railway sleepers and telegraph poles treated with creosote, timber from cooling towers or marine structures, and wood heavily impregnated with older preservatives are classed as hazardous. They travel under consignment notes, as special waste in Scotland, and are arranged through hazardous waste collection.
Wood contaminated by what it carried is treated the same way: pallets soaked in spilt oil or chemicals are no longer clean wood. The same restriction applies to a mixed-waste RORO, so placing such timber in a container does not make it acceptable. If you are unsure about a batch, send a photograph and a note of where it came from.
A collection or a wood-only container
A one-off stack, or a build-up that happens a few times a year, is a collection job, and small quantities can go by man and van.
A distribution centre, timber-frame manufacturer or large construction site produces wood steadily, and paying for labour to load it each time makes little sense. Timber is bulky and fairly light, so it suits the larger containers: a 35-yard or 40-yard RORO kept for wood only, loaded by your own team and swapped on a scheduled collection.
Getting the stack ready
Place the wood somewhere a vehicle can reach without crossing soft ground. Stack pallets squarely to a height that is stable; loose offcuts are easier to handle in stillages, dumpy bags or cages than in a scattered heap. Nails, screws and staples can stay in. Strapping, shrink wrap, cardboard and polystyrene should come off, since they contaminate a wood load and can be sent with cardboard or recycling instead.
When you ask for a quote through the online form or on 0333 121 1056, give an approximate pallet count, the split between whole and broken, any other timber, and whether a forklift is available on site.
Accepted in a pallet and timber collection
- Whole and broken wooden pallets
- Crates, packing cases and cable drums
- Untreated timber offcuts
- Joists, studwork and shuttering ply
- Chipboard, MDF and laminated board (declared)
- Doors, skirting and painted joinery (declared)
- Fence panels and decking
Not accepted as standard wood waste
- Creosote-treated sleepers and telegraph poles
- Wood contaminated with oil or chemicals
- Hire-pool pallets owned by a third party
- Plastic pallets
- Timber bonded to asbestos sheet
- Shrink wrap, strapping and other packaging
- Upholstered furniture
Not sure? See our waste types guide or ask us when you book.
Ideal for
- Warehouses and distribution centres
- Retail goods-in yards
- Builders' merchants
- Joinery and furniture makers
- Construction sites
- Importers and wholesalers
Pallet & Timber Collection – your questions answered
Can’t see your question? Call 0333 121 1056 or send us a message.
Do you collect broken pallets as well as whole ones?
Yes. Broken pallets are collected for wood recycling, while sound ones may be sorted for reuse or repair by the partner. Keeping the two in separate stacks is helpful but not essential. Let us know the rough proportion of each so the right vehicle is sent.
What should we do with blue or other branded pool pallets?
Set them aside. Pallets belonging to a rental pool remain the operator’s property and should be returned through its own recovery arrangements, which your supplier or the markings on the pallet will identify. They should not be included in a waste collection.
Can MDF and chipboard go with pallets?
They can be collected at the same visit, but tell us beforehand. Board materials are a lower grade than clean pallet wood and may be loaded or recorded separately. A load described as clean pallets that turns out to be mostly melamine-faced chipboard is likely to be reclassified.
Do nails and fixings have to be removed from timber?
No. Nails, screws, staples and small brackets are removed by magnets during wood processing. What does need to come off is anything non-metallic that clings to the wood, such as plastic wrap, strapping, foam, plasterboard or roofing felt.
Often booked with Pallet & Timber Collection
Need more than one service for the same project? Add them to one enquiry and we’ll coordinate them together.
Get a Quick Quote
Tell us the site postcode, the waste, the container size if you know it, and when you need it. Mention exchanges, other sites or specialist waste and we will include them. Photos of the waste and the access help.
ROROSkipHire.com is operated by Waste Cloud Ltd. Services are coordinated centrally and carried out by licensed local waste management and haulage partners across England, Scotland and Wales.