RORO skip hire acrossEnglandScotlandWales
0333 121 1056
Industries · Motor Trade & Vehicle Production

RORO Skip Hire for the Automotive Sector

Containers for the bulky, non-hazardous side of motor trade waste, with separate collections arranged for tyres, batteries, oils and paint.

Automotive 0333 121 1056
  • Licensed local partners across England, Scotland and Wales
  • Waste paperwork provided with every job
  • Free, no-obligation quotes
Get a Quick Quote

Every replacement bumper arrives in a carton the size of a wardrobe. Multiply that by the daily parts delivery to a busy body shop or dealer group and the result is a steady stream of cardboard, foam, polythene and pallets, together with the damaged panels and trim the new parts replace. Add steel and aluminium from repair work and the bulk waste from an automotive site quickly outgrows wheelie bins.

The same sites also hold an unusually long list of restricted materials, from used oil to airbags. Getting automotive waste right is largely a matter of drawing a firm line between the two. ROROSkipHire.com arranges roll-on roll-off skip hire for the bulky, non-hazardous side through licensed local waste partners, and organises the specialist collections for everything else. Tell us what your workshop produces on 0333 121 1056 or through the quote form.

Body shops and accident repair centres

Collision repair creates more volume per job than any other part of the trade. Bumpers, grilles, wheel-arch liners, headlamp units and interior trim are mostly plastic and very light; wings, bonnets and doors are steel or aluminium. Keeping metal apart from everything else is worthwhile, because clean scrap metal is a recyclable commodity whereas a mixed load is simply waste.

A common arrangement is a smaller container for panels and a 35-yard RORO for packaging and plastics. Windscreens and other laminated glass should be mentioned when you enquire, as should bumpers with sensors or wiring still attached. Lamps and electronic modules are electrical waste and are kept out of the mixed container.

Dealerships, service centres and fast-fit sites

Franchised dealers and independent garages produce less bulk per day but have more varied waste. Parts cartons and pallets dominate, and where a yard has room a single mid-sized container exchanged on request often replaces a row of overflowing bins. Sites without space for a hook-loader are usually better served by 1100 litre bins and a cardboard collection.

Showroom refits are where dealerships most often need large-capacity skip hire. Manufacturer brand updates mean stripping out floor tiles, display walls, signage and furniture against a tight deadline, usually while the business keeps trading. That is standard shopfitting waste, and a 30-yard container on short hire in the rear yard is the typical solution.

What must never go in the container

Automotive premises handle more hazardous waste than most businesses realise, and none of it can be placed in a standard mixed-waste RORO. Used engine oil, oil filters, brake fluid, coolant, fuel and contaminated rags or absorbents all need a dedicated oils and fuels collection. Body shop paints, thinners, gun wash and aerosols go through paints and solvents.

Tyres are barred from general containers and are collected by the load. Lead-acid starter batteries and lithium traction packs from hybrid and electric vehicles are hazardous and, in the case of damaged lithium packs, a serious fire risk. Undeployed airbags and seatbelt pretensioners contain pyrotechnic charges and need specialist handling.

Component manufacturers and parts distribution

Further up the supply chain the volumes change character. Pressing, machining and assembly plants generate offcuts, swarf, rejected components, returnable and non-returnable packaging, and protective films, often around the clock. Parts distribution warehouses produce cardboard and stretch wrap in quantity. In both cases containers stay on site permanently and are swapped to a rhythm that follows production, not the calendar.

Our pages on manufacturing waste and long-term RORO hire cover that kind of standing arrangement. Metal swarf is dense and may carry cutting fluid, so it belongs in the smaller sizes and has to be described accurately. Light packaging can justify a 40-yard container.

Exchanges, weights and paperwork

Workshops cannot afford a full container blocking the yard. A RORO skip exchange removes the loaded unit and leaves an empty one in the same visit; timing depends on local availability and is confirmed when you book, so ask before the container is completely full. Loads must sit below the top of the container so they can be sheeted.

Metal is where weight catches people out. Engine blocks, gearboxes, brake discs and suspension parts are heavy for their size, so a metal container is kept small and may be collected part-filled. Payloads vary by container and local partner and are confirmed with your quote. Each load is covered by a waste transfer note, and hazardous collections by consignment notes; keep both with your site records.

Typical users

  • Accident repair centres
  • Franchised dealerships
  • Independent garages
  • Tyre and fast-fit centres
  • Component manufacturers
  • Parts distribution warehouses
  • Fleet workshops

Automotive – your questions answered

Can’t see your question? Call 0333 121 1056 or send us a message.

Can old tyres go in a RORO skip?

No. Tyres are excluded from standard mixed-waste containers and have to be collected separately by a carrier taking them to an authorised tyre recovery facility. Tell us the approximate number and whether they are car, van or commercial sizes, and whether any are still on rims.

Are plastic bumpers recyclable?

Some are, depending on the polymer, the paint and what is still attached, and on the facilities available near you. Stripped, segregated bumpers have the best chance. Our plastic waste page explains how different plastics are handled; where recycling is not practical locally they are treated as general waste.

Do you take scrap cars or vehicle shells?

We do not. A vehicle that has reached the end of its life must go to an authorised treatment facility that can depollute it and issue the appropriate certificate. Containers we arrange are for parts, panels and packaging removed in the course of repair or production.

Can oily rags and used filters go in general workshop waste?

They should not. Absorbents, rags and filters contaminated with oil or fuel are normally classed as hazardous and are stored in closed, labelled containers for specialist collection. Putting them in a mixed load can cause it to be rejected and creates a fire risk in the container.

Often booked with Automotive

Need more than one service for the same project? Add them to one enquiry and we’ll coordinate them together.

Get a quote

Get a Quick Quote

Tell us the site postcode, the waste, the container size if you know it, and when you need it. Mention exchanges, other sites or specialist waste and we will include them. Photos of the waste and the access help.

Prefer to talk? 0333 121 1056

ROROSkipHire.com is operated by Waste Cloud Ltd. Services are coordinated centrally and carried out by licensed local waste management and haulage partners across England, Scotland and Wales.